Pipeline Repair Clamp or Flange / Split Sleeves

Split sleeves are widely for making pipeline repairs to a variety of high or low pressure and high or low temperature pipeline, including oil, water, gas, steam and chemical process. The clamp halves are joined by bolts to form an high integrity pressure vessel around the damaged or leaking pipe. Sealing is provided by molded elastomer seals of the highest quality selected for compatibility with the pipeline product and operating temperature. The Split Sleeve may also be welded after installation to effect a permanent seal if conditions justify the additional expense.

Clamp / Split Sleeve - MA9 Type

Clamp / Split Sleeve - MA9 Type

Standard working pressure is 10Mpa (1450psi). Higher or lower working pressure, longer length and other sizes are available on request. Buna N packing is standard.

Active Length:
2" to 12" : 140mm
14" and over : 203.5mm
All kind of steel grade

Standard working pressure is 10Mpa (1450psi). Higher or lower working pressure, longer length and other sizes are available on upon request. Buna N packing is standard.

(Other Active length can be offered  upon on request)